MOBILE DID TRUNK & PJSIP EXTENSION SETTINGS FOR ASTERISK/FREEPBX

After you have received your welcome notice from GTI, follow these steps. These are BASIC settings to get your PBX system up and running!

STEP #1  ADD (Whitelist) THESE IP IN YOUR SERVER FIREWALL

99.198.122.166
99.198.110.51
96.127.174.38
108.163.205.178
37.18.129.170
37.18.129.171
37.18.129.172
37.18.129.173

STEP #2  This Trunk allow GTIGLOBAL to send traffic to your server and is only use for those reasons...  add the following information below:  (This example uses IP Authentication for your Trunk)

---------------------------------

SIP Trunk:

host=mordid.mvnoserver.com
context=from-trunk    or   context=from-pstn-e164-us
type=friend
port=5062

STEP #3  Add the DID Number for SIM in your FreePBX Inbound make sure to use the 11 digits.

STEP #4  Create PJSIP Extension  In your FreePBX (use same extension number and password as in the GTI Portal). Assign/route the DID to the PJSIP extension in your PBX.

STEP #5  Test the DID to see if it is reaching your PBX, call the DID Number Associated with the SIM (make sure you call from a line that is not connected to your network for a real live test).

STEP #6  Install the SIM in your phone https://support.ncsvoice.com/knowledgebase.php?article=58

STEP #7   Using the Cellphone, make a call to see if you can make call out from your PBX. You can dial *97 or your voicemail feature code if it available assuming you setup voicemail for the extension. Check your CDR for the call results.

If you need further help, please open a support ticket.